equipment

Reliable Supply of Recycled Ferrous & Non-Ferrous Metals

Ferrous Metals

Non-Ferrous Metals

WEEE Recycling & Resource Recovery

At Alisons, we are committed to responsible Waste Electrical and Electronic Equipment (WEEE) recycling, helping recover valuable resources while protecting the environment.

The process begins with the safe collection and transportation of electronic waste to authorized recycling facilities, where every item is carefully inspected, sorted, and processed in compliance with environmental regulations and industry standards.

Hazardous materials are removed using safe and approved methods, while valuable resources such as copper, aluminum, steel, plastics, glass, and other recyclable metals are recovered through advanced mechanical recycling processes. Depending on the type of electronic equipment, up to 90% of materials can be recovered and reintroduced into the production cycle.

These recovered materials become high-quality secondary raw materials used in the manufacturing of new products, reducing the need for virgin resources, minimizing waste, and supporting a sustainable Circular Economy.

Through responsible WEEE recycling and efficient resource recovery, Alisons helps businesses and communities reduce electronic waste while contributing to a cleaner, greener, and more sustainable future.

Stainless Steel SS304

Stainless Steel SS304 components are durable electromechanical materials primarily manufactured using ferrous alloys such as chromium and nickel. Widely used in automotive, industrial, and power generation applications, they are valued for their strength, reliability, and ability to deliver consistent corrosion resistance under demanding operating conditions.

Recycling :

  • Architectural trim and molding
  • Food processing equipment
  • Chemical processing tanks
  • Fasteners and hardware units
  • Used scrap pipelines
  • Valve housings and casings
  • Heat exchanger tubing
  • Storage tanks and vessels
  • Ferrous metal alloys and scrap
  • Other stainless steel-related materials

Shredded ISRI 211

Alternators are durable electromechanical components primarily manufactured using ferrous metals such as steel and iron. Widely used in automotive, industrial, and power generation applications, they are valued for their strength, reliability, and ability to deliver consistent electrical performance under demanding operating conditions.

Recycling :

  • Shredded automobile scrap
  • Heavy structural steel scrap
  • Industrial demolition scrap
  • Shredded white goods units
  • Used iron scrap cores
  • Fragmentized housings and casings
  • Magnetic separations and clips
  • Clean shredder rotors and plates
  • Ferrous metal components and scrap
  • Other shredder-related materials

Hms 1&2 mix

Hms 1&2 mix stocks are durable metallurgical scrap primarily manufactured using ferrous metals such as steel and iron. Widely used in automotive, industrial, and power generation applications, they are valued for their weight, reliability, and ability to deliver consistent melting performance under demanding steelmaking operating conditions.

Recycling :

  • Heavy structural steel beams
  • Industrial demolition iron plates
  • Wrought iron pipe segments
  • Mixed rebar reinforcement units
  • Used machinery steel cores
  • Machine castings and housings
  • Miscellaneous cut steel pieces
  • Plate and girder scrap
  • Ferrous metal components and scrap
  • Other steelmaking-related materials

Train Wheels

Train wheels are durable mechanical components primarily manufactured using ferrous metals such as steel and iron. Widely used in railway, transit, and heavy freight applications, they are valued for their weight, reliability, and ability to deliver consistent material recycling value under demanding scrap processing conditions.

Recycling :

  • Passenger rail car wheels
  • Heavy-duty freight locomotive wheels
  • Industrial transit train axles
  • Steel rail track segments
  • Used machinery steel cores
  • Cast iron wheel flanges
  • Thick steel pipe sections
  • Solid steel axle stators
  • Ferrous metal components and scrap
  • Other railway-related materials

Mullberry

Millberry stocks are durable metallurgical components primarily manufactured using non-ferrous metals such as copper and silver. Widely used in telecommunications, residential, and power distribution applications, they are valued for their purity, flexibility, and ability to deliver consistent electrical performance under demanding manufacturing operating conditions.

Recycling :

  • High-purity electrical wire strands
  • Heavy-duty utility copper chops
  • Bare overhead transmission wires
  • Stripped power conductor units
  • Clean unalloyed copper cores
  • Uncoated bright metal casings
  • Raw bare copper coils
  • Loose wire strands and conductors
  • Non-ferrous metal components and scrap
  • Other copper-smelting materials

Honey Brass

Honey brass stocks are durable metallurgical components primarily manufactured using non-ferrous metals such as copper and zinc. Widely used in plumbing, architecture, and fluid handling applications, they are valued for their weight, reliability, and ability to deliver consistent melting performance under demanding alloy casting conditions.

Recycling :

  • Residential plumbing faucets
  • Commercial water valves
  • Decorative architectural hardware
  • Pipe fitting connectors and units
  • Used brass machinery cores
  • Chrome-plated brass casings
  • Yellow brass tubes and coils
  • Cast ornaments and stators
  • Non-ferrous metal components and scrap
  • Other brass-related materials

Aluminium Cable

Aluminium cables are durable electromechanical components primarily manufactured using non-ferrous metals such as aluminium and magnesium. Widely used in telecommunications, residential, and power distribution applications, they are valued for their conductivity, flexibility, and ability to deliver consistent electrical performance under demanding operating conditions.

Recycling :

  • Overhead electrical transmission cables
  • Heavy-duty industrial power lines
  • Substation utility distribution wires
  • Stripped wire strand units
  • Used aluminum conductor cores
  • Weatherproof insulation and casings
  • Bright bare aluminum coils
  • Wire bundles and conductors
  • Non-ferrous metal components and scrap
  • Other cabling-related materials

Aluminium Pucks

Aluminium pucks are durable metallurgical components primarily manufactured using non-ferrous metals such as aluminium and silicon. Widely used in automotive, industrial, and aerospace casting applications, they are valued for their density, purity, and ability to deliver consistent melting performance under demanding foundry operating conditions.

Recycling :

  • Industrial machining turnings
  • Automotive powertrain casting chips
  • Manufacturing mill milling scrap
  • Compressed briquette bundle units
  • Used aluminum alloy cores
  • Clean dense puck casings
  • Consolidated swarf and coils
  • Shaving extrusions and stators
  • Non-ferrous metal components and scrap
  • Other briquetting-related materials

Ubc Cans

UBC cans are durable packaging components primarily manufactured using non-ferrous metals such as aluminium and manganese. Widely used in residential, commercial, and beverage distribution applications, they are valued for their lightness, recyclability, and ability to deliver consistent melting performance under demanding rolling mill operating conditions.

Recycling :

  • Carbonated soft drink cans
  • Aluminium beer beverage cans
  • Liquid refreshment juice cans
  • Compacted briquette bale units
  • Used aluminum alloy cores
  • Printed outer container casings
  • Crushed metal sheets and coils
  • Pull-tab lids and stators
  • Non-ferrous metal components and scrap
  • Other beverage-related materials

Zuric

Zurik stocks are durable electromechanical components primarily manufactured using non-ferrous metals such as aluminium and nickel. Widely used in automotive, industrial, and electronic reprocessing applications, they are valued for their density, purity, and ability to deliver consistent melting performance under demanding smelting operating conditions.

Recycling :

  • Shredded automobile non-ferrous scrap
  • Fragmentized electronic media scrap
  • Industrial sensor-sorted scrap
  • Mixed metallics separation units
  • Used metal fraction cores
  • Stainless steel housings and casings
  • Red and yellow copper coils
  • Shredded circuit rotors and stators
  • Non-ferrous metal components and scrap
  • Other sorting-related materials

Aluminium Cables PVC

Aluminium cables are durable electromechanical components primarily manufactured using non-ferrous metals such as aluminium and copper. Widely used in telecommunications, residential, and power distribution applications, they are valued for their conductivity, flexibility, and ability to deliver consistent electrical performance under demanding operating conditions.

Recycling :

  • PVC insulated household wires
  • Low-voltage commercial power cables
  • Underground utility distribution lines
  • Coiled wire strand units
  • Covered aluminum conductor cores
  • Heavy plastic coverings and casings
  • Bundled insulated metal coils
  • Stripped wire cores and stators
  • Non-ferrous metal components and scrap
  • Other cabling-related materials

Electric Motors

Electric motors are durable electromechanical components primarily manufactured using non-ferrous metals such as copper and aluminum. Widely used in automotive, industrial, and power generation applications, they are valued for their conductivity, reliability, and ability to deliver consistent material recycling value under demanding scrap processing conditions.

Recycling :

  • Small appliance copper motors
  • Aluminum-wound water pump motors
  • High-grade brass component motors
  • Alternator-starter armature units
  • Clean non-ferrous motor cores
  • Aluminum alloy outer casings
  • Bright copper windings and coils
  • Internal red brass rotors and stators
  • Non-ferrous metal components and scrap
  • Other electric motor-related materials

Fridge Compressor Scrap

Compressors are durable electromechanical components primarily manufactured using non-ferrous metals such as copper and aluminum. Widely used in residential, commercial, and food preservation applications, they are valued for their conductivity, reliability, and ability to deliver consistent material recycling value under demanding scrap processing conditions.

Recycling :

  • Domestic refrigerator copper motors
  • Commercial deep freezer windings
  • Air conditioner aluminum coils
  • Sealed hermetic motor units
  • Clean non-ferrous compressor cores
  • Aluminum alloy internal casings
  • Internal copper windings and coils
  • Copper-wound rotors and stators
  • Non-ferrous metal components and scrap
  • Other cooling-related scrap materials

High Grade Motors

High grade motors are durable electromechanical components primarily manufactured using non-ferrous metals such as copper and aluminum. Widely used in automotive, industrial, and power generation applications, they are valued for their conductivity, reliability, and ability to deliver consistent material recycling value under demanding scrap processing conditions.

Recycling :

  • Industrial copper-wound motors
  • Commercial generator stators
  • Heavy-duty traction motors
  • Stripped armature units
  • Copper-dense appliance cores
  • Aluminum internal casings
  • Exposed copper coils
  • Bare motor stators
  • Non-ferrous metal components
  • High-yield motor materials

Copper Cables

Copper cables are durable electromechanical components primarily manufactured using non-ferrous metals such as copper and aluminum. Widely used in telecommunications, residential, and power distribution applications, they are valued for their conductivity, flexibility, and ability to deliver consistent electrical performance under demanding operating conditions.

Recycling :

  • Single-core industrial cables
  • Heavy-duty armored cables
  • Telecommunication data cables
  • Coaxial-ethernet wiring units
  • Used copper cores
  • Plastic insulation casings
  • Bare copper coils
  • Wire conductors
  • Non-ferrous metal scrap
  • Other Cabling-related materials

Washing Machine Mix Motors

Washing machine mix motors are durable electromechanical components primarily manufactured using non-ferrous metals such as copper and aluminum. Widely used in automotive, industrial, and power generation applications, they are valued for their conductivity, reliability, and ability to deliver consistent material recycling value under demanding scrap processing conditions.

Recycling :

  • Domestic Washer Electric Motors
  • Mixed Appliance Drive Motors
  • Spin Cycle Induction Motors
  • Pulley Assembly Motor Units
  • Scrap Appliance Motor Cores
  • Aluminum Alloy Outer Casings
  • Internal Copper Wire Coils
  • Exposed Rotor Shaft Stators
  • Non-Ferrous Metal Components
  • Mixed Motor Scrap Materials

Window Foamy Blinds

Window foamy blinds are durable architectural components primarily manufactured using non-ferrous metals such as aluminium and magnesium. Widely used in residential, commercial, and climate control applications, they are valued for their lightness, insulation, and ability to deliver consistent material recycling value under demanding scrap processing conditions.

Recycling :

  • Residential Rolling Shutter Blinds
  • Commercial Insulated Window Slats
  • Thermal Foam-Filled Profiles
  • Compacted Blind Bale Units
  • Scrap Insulated Shutter Cores
  • Aluminium Outer Slat Casings
  • Coiled Profile Metal Sheets
  • Internal Foam Insulating Stators
  • Non-Ferrous Metal Components
  • Mixed Shutter Scrap Materials

Car Air Compressors

Compressors are durable electromechanical components primarily manufactured using non-ferrous metals such as aluminium and copper. Widely used in automotive, industrial, and climate control applications, they are valued for their conductivity, reliability, and ability to deliver consistent material recycling value under demanding scrap processing conditions.

Recycling :

  • Automotive Air Conditioning Compressors
  • Commercial Vehicle Cooling Pumps
  • Passenger Car AC Compressors
  • Belt-Driven Clutch Compressor Units
  • Used Automotive Appliance Cores
  • Cast Aluminum Outer Casings
  • Internal Copper Wire Coils
  • Swash Plate Assembly Stators
  • Non-Ferrous Metal Components
  • Mixed Automotive Scrap Materials

Starters

Starters are durable electromechanical components containing high-value non-ferrous metals such as copper and aluminum. Widely used in automotive, industrial, and heavy equipment applications, they are highly sought after for their recyclable material content, reliable construction, and consistent value in non-ferrous metal recovery.

Recycling :

  • Passenger vehicle starters
  • Heavy-duty truck starters
  • Industrial starters
  • Starter-generator units
  • Used starter cores
  • Starter housings and casings
  • Copper windings and solenoids
  • Armatures and aluminum components
  • Non-ferrous metal components and scrap
  • Other starter-related materials

Alternators

Alternators are durable electromechanical components containing high-value non-ferrous metals such as copper and aluminum. Widely used in automotive, industrial, and power generation applications, they are highly valued for their recyclable metal content, reliable performance, and consistent value in non-ferrous metal recovery and processing.

Recycling :

  • Passenger vehicle alternators
  • Heavy-duty truck alternators
  • Industrial alternators
  • Starter-alternator units
  • Used alternator cores
  • Alternator housings and casings
  • Copper windings and coils
  • Aluminum housings, rotors, and stators
  • Non-ferrous metal components and scrap
  • Other alternator-related materials

Meatballs

Meatballs are dense electromechanical scrap units containing valuable non-ferrous metals, primarily copper and aluminum. Commonly recovered from automotive shredding, salvage, and metal recycling operations, they are highly valued for their concentrated recyclable metal content and their consistent value in non-ferrous metal recovery and processing.

Recycling :

  • Shredded electric motor cores
  • Heavy-duty industrial armatures
  • Appliance motor scrap
  • Starter-generator scrap units
  • Spent meatball scrap piles
  • Aluminum housings and casings
  • Copper windings and coils
  • Shredder-isolated rotors and stators
  • Non-ferrous metal components and scrap
  • Other motor-related recycling materials

Big Motors

Big motors are durable electromechanical components primarily manufactured using ferrous metals such as steel and iron. Widely used in automotive, industrial, and power generation applications, they are valued for their weight, reliability, and ability to deliver consistent material recycling value under demanding scrap processing conditions.

Recycling :

  • Commercial HVAC pump motors
  • Heavy-duty industrial drive motors
  • Factory production line motors
  • Three-phase induction motor units
  • Used electric motor cores
  • Cast iron housings and casings
  • Heavy copper windings and coils
  • Large motor rotors and stators
  • Ferrous metal components and scrap
  • Other electric motor-related materials

Aluminium Transformers

Aluminium transformer scrap consists of dismantled and obsolete transformers containing high-grade aluminium windings, laminated cores, and other recoverable non-ferrous components. Commonly generated from industrial facilities, power distribution systems, and manufacturing plants, this material is highly valued for its excellent aluminium recovery rate and recycling potential. It is processed to recover reusable metals, helping reduce waste while supporting sustainable manufacturing and resource conservation.

Recycling :

  • Aluminium winding scrap
  • Distribution transformer scrap
  • Power transformer components
  • Transformer coils and windings
  • Aluminium stators and rotors
  • Laminated transformer cores
  • Electrical motor and transformer parts
  • Industrial electrical equipment scrap
  • Mixed non-ferrous transformer materials
  • Recyclable aluminium electrical components

industrial motors scrap

Industrial motors scrap consists of discarded and end-of-life electric motors collected from factories, manufacturing plants, construction sites, and industrial facilities. These motors contain valuable recyclable materials such as copper, aluminium, steel, and iron, making them an important source for metal recovery. After proper dismantling and processing, the recovered materials are reused in manufacturing, reducing waste and supporting environmentally responsible recycling practices.

Recycling :

  • AC and DC industrial motors
  • Electric motor housings
  • Copper and aluminium motor windings
  • Industrial pump motors
  • Gearbox and motor assemblies
  • Motor stators and rotors
  • Heavy-duty electric motors
  • Industrial machinery motor scrap
  • Mixed ferrous and non-ferrous motor components
  • Recyclable electrical motor parts